Heath Mills Chimney Repairs Required? It’s Not Hard to Identify the Symptoms

Evidence that a Heath Mills home’s chimney requires repairs isn’t difficult to find.

Bricks, or chips from bricks, on the ground next to the chimney. Discoloration of remaining bricks in the structure. Noticeable gaps between bricks. Efflorescence – a white, chalky powder – on your Heath Mills chimney’s exterior.

Inside a house, discoloration or efflorescence inside the fireplace is a red flag, too.

Each sign might have a different cause. Hesitating to act isn’t recommended, though. Issues can rapidly worsen. The initial step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Heath Mills.

The underlying reason in almost every chimney problem is water. Sometimes the cause is cracked or damaged flue tiles inside the chimney, which permit moisture to escape into the chimney cavity. If a water heater vents into the chimney, the issue can be far worse. Either way, problems ensue once moisture has direct contact with masonry.

Gaps in a chimney – from absent bricks, or failed mortar joints – are major red flags. Heath Mills rains can directly get inside the chimney cavity, making a bad situation far worse.

The initial step is to confront root causes. If flue tiles have lost their structural integrity, installing a stainless steel chimney liner typically stops internal moisture issues. The damage to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is occasionally all that’s required. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ standard five-year warranty, promising a decade of protection from the elements.

If the source of water leakage is a cracked chimney crown, two options are available. A stainless steel chimney cap can be mounted atop the crown, forming an “umbrella” above the chimney. Or, if the crown is too damaged, a new one is poured.

If a chimney is beyond restoration, a full or partial rebuild is in order. A masonry project takes three to five days; for appliance chimneys, usually one day. You and your Heath Mills neighbors can expect scaffolding to be erected, or a temporary rooftop construction station built.

The chimney is rebuilt with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown employs a 2-inch overhang to keep water off the new chimney below. Your new chimney is as beautiful as it is functional!

If you detect indicators of a failing chimney, what’s the problem … and the remedy? Only inspection by a qualified chimney company can tell. Time, though, is of the essence – contact Butler Chimneys before additional (or worse) symptoms appear!