North Shore Chimney Repairs Required? It’s Not Hard to Spot the Warnings

Evidence that a North Shore home’s chimney needs repairs isn’t hard to spot.

Bricks, or chips from bricks, on the ground next to the chimney. Discoloration of remaining bricks in the structure. Noticeable gaps between bricks. Efflorescence – a white, chalky powder – coating your North Shore chimney’s exterior.

Inside the home, staining or efflorescence inside the fireplace is a warning, too.

Each symptom might have a different cause. Waiting to act isn’t advisable, though. Issues can rapidly worsen. The initial step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in North Shore.

The commonality in almost every chimney problem is water. Sometimes the cause is cracked or damaged flue tiles inside the chimney, which allow moisture to seep into the chimney cavity. If a water heater vents into the chimney, the situation can be far worse. Either way, problems ensue once moisture has direct contact with masonry.

Gaps in a chimney – from absent bricks, or compromised mortar joints – are serious warnings. North Shore rains can directly get inside the chimney cavity, making a bad scenario far worse.

The initial step is to confront root causes. If flue tiles have lost their structural integrity, installing a stainless steel chimney liner usually stops internal moisture problems. The harm to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is occasionally all that’s involved. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ standard five-year warranty, guaranteeing a decade of protection from the elements.

If the source of water leakage is a cracked chimney crown, two options exist. A stainless steel chimney cap can be mounted atop the crown, forming an “umbrella” over the chimney. Or, if the crown is too deteriorated, a new one is poured.

If a chimney is beyond restoration, a full or partial rebuild is in line. A masonry project takes three to five days; for appliance chimneys, usually one day. You and your North Shore neighbors can expect scaffolding to be erected, or a temporary rooftop construction station built.

The chimney is rebuilt with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown uses a 2-inch overhang to keep water off the new chimney below. Your new chimney is as beautiful as it is functional!

If you identify indicators of a deteriorating chimney, what’s the issue … and the fix? Only inspection by a qualified chimney company can find the answers. Time, though, is of the essence – contact Butler Chimneys before additional (or worse) symptoms appear!