Saint Francis Chimney Repairs Needed? It’s Not Hard to Identify the Warnings

Indication that a Saint Francis home’s chimney requires repairs isn’t hard to find.

Bricks, or chips from bricks, on the ground next to the chimney. Staining of remaining bricks in the structure. Evident gaps between bricks. Efflorescence – a white, chalky powder – lining your Saint Francis chimney’s exterior.

Inside a house, discoloration or efflorescence inside the fireplace is a warning, too.

Each symptom might have a different cause. Waiting to act isn’t recommended, though. Complications can quickly worsen. The initial step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Saint Francis.

The commonality in almost every chimney issue is water. Sometimes the cause is cracked or damaged flue tiles inside the chimney, which permit moisture to escape into the chimney cavity. If a water heater vents into the chimney, the situation can be far worse. Either way, problems start when moisture has direct contact with masonry.

Gaps in a chimney – from absent bricks, or failed mortar joints – are major red flags. Saint Francis rains can directly penetrate inside the chimney cavity, making a bad scenario far worse.

The first step is to confront root causes. If flue tiles have lost their structural integrity, installing a stainless steel chimney liner typically stops internal moisture issues. The damage to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is sometimes all that’s required. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ normal five-year warranty, guaranteeing a decade of protection from the elements.

If the source of water leakage is a damaged chimney crown, two options exist. A stainless steel chimney cap can be mounted atop the crown, creating an “umbrella” above the chimney. Or, if the crown is too deteriorated, a new one is poured.

If a chimney is beyond saving, a full or partial rebuild is in line. A masonry project runs three to five days; for appliance chimneys, usually one day. You and your Saint Francis neighbors can expect scaffolding to be erected, or a temporary rooftop construction station built.

The chimney is reconstructed with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown uses a 2-inch overhang to keep water off the new chimney beneath. Your new chimney is as beautiful as it is functional!

If you spot indicators of a failing chimney, what’s the issue … and the remedy? Only inspection by a qualified chimney company can find the answers. Time, though, is of the essence – contact Butler Chimneys before additional (or worse) symptoms show up!