Horns Corners Chimney Repairs Required? It’s Not Hard to Spot the Warnings

Proof that a Horns Corners home’s chimney requires repairs isn’t difficult to identify.

Bricks, or chips from bricks, on the ground next to the chimney. Staining of remaining bricks in the structure. Evident gaps between bricks. Efflorescence – a white, chalky powder – coating your Horns Corners chimney’s exterior.

Inside the house, discoloration or efflorescence inside the fireplace is a warning, too.

Each indicator might have a different cause. Hesitating to act isn’t advisable, though. Complications can rapidly worsen. The first step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Horns Corners.

The underlying source in almost every chimney issue is water. Often the culprit is cracked or damaged flue tiles inside the chimney, which permit moisture to enter into the chimney cavity. If a water heater vents into the chimney, the problem can be far worse. Either way, problems ensue when moisture has direct contact with masonry.

Gaps in a chimney – from absent bricks, or compromised mortar joints – are major red flags. Horns Corners rains can directly leak inside the chimney cavity, making a bad scenario far worse.

The initial step is to address root causes. If flue tiles have lost their structural integrity, putting in a stainless steel chimney liner generally stops internal moisture issues. The damage to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is sometimes all that’s required. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ standard five-year warranty, promising a decade of protection from the elements.

If the source of water leakage is a cracked chimney crown, two options exist. A stainless steel chimney cap can be mounted atop the crown, forming an “umbrella” above the chimney. Or, if the crown is too deteriorated, a new one is poured.

If a chimney is beyond restoration, a full or partial rebuild is in line. A masonry project runs three to five days; for appliance chimneys, usually one day. You and your Horns Corners neighbors can expect scaffolding to be put up, or a temporary rooftop construction station built.

The chimney is reconstructed with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown features a 2-inch overhang to keep water off the new chimney below. Your new chimney is as attractive as it is functional!

If you identify symptoms of a deteriorating chimney, what’s the issue … and the fix? Only inspection by a qualified chimney company can tell. Time, though, is of the essence – contact Butler Chimneys before more (or worse) symptoms show up!