Knellsville Chimney Repairs Required? It’s Not Hard to Spot the Warnings

Proof that a Knellsville home’s chimney requires repairs isn’t difficult to find.

Bricks, or chips from bricks, on the ground next to the chimney. Staining of remaining bricks in the structure. Visible gaps between bricks. Efflorescence – a white, chalky powder – coating your Knellsville chimney’s exterior.

Inside a home, staining or efflorescence inside the fireplace is a warning, too.

Each symptom might have a different cause. Hesitating to act isn’t advisable, though. Issues can rapidly worsen. The first step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Knellsville.

The underlying reason in almost every chimney problem is water. Sometimes the cause is cracked or damaged flue tiles inside the chimney, which allow moisture to escape into the chimney cavity. If a water heater vents into the chimney, the problem can be far worse. Either way, problems begin once moisture has direct contact with masonry.

Gaps in a chimney – from absent bricks, or compromised mortar joints – are serious warnings. Knellsville rains can directly penetrate inside the chimney cavity, making a bad situation far worse.

The initial step is to confront root causes. If flue tiles have lost their structural integrity, installing a stainless steel chimney liner generally stops internal moisture problems. The harm to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is sometimes all that’s involved. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ standard five-year warranty, promising a decade of protection from the elements.

If the source of water leakage is a damaged chimney crown, two options exist. A stainless steel chimney cap can be mounted atop the crown, forming an “umbrella” over the chimney. Or, if the crown is too deteriorated, a new one is poured.

If a chimney is beyond restoration, a full or partial rebuild is in line. A masonry project runs three to five days; for appliance chimneys, usually one day. You and your Knellsville neighbors can expect scaffolding to be erected, or a temporary rooftop construction station built.

The chimney is reconstructed with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown features a 2-inch overhang to keep water off the new chimney below. Your new chimney is as beautiful as it is functional!

If you notice indicators of a deteriorating chimney, what’s the problem … and the fix? Only inspection by a qualified chimney company can find the answers. Time, though, is of the essence – contact Butler Chimneys before additional (or worse) symptoms appear!