Lake Church Chimney Repairs Required? It’s Not Difficult to Spot the Symptoms

Proof that a Lake Church home’s chimney requires repairs isn’t difficult to spot.

Bricks, or chips from bricks, on the ground next to the chimney. Discoloration of remaining bricks in the structure. Obvious gaps between bricks. Efflorescence – a white, chalky powder – lining your Lake Church chimney’s exterior.

Inside the house, discoloration or efflorescence inside the fireplace is a warning, too.

Each sign might have a different cause. Waiting to act isn’t recommended, though. Complications can quickly worsen. The initial step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Lake Church.

The underlying source in almost every chimney problem is water. Sometimes the cause is cracked or damaged flue tiles inside the chimney, which allow moisture to escape into the chimney cavity. If a water heater vents into the chimney, the issue can be far worse. Either way, problems begin when moisture has direct contact with masonry.

Gaps in a chimney – from missing bricks, or compromised mortar joints – are major warnings. Lake Church rains can directly penetrate inside the chimney cavity, making a bad scenario far worse.

The first step is to address root causes. If flue tiles have lost their structural integrity, installing a stainless steel chimney liner usually stops internal moisture problems. The damage to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is sometimes all that’s involved. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ standard five-year warranty, promising a decade of protection from the elements.

If the source of water leakage is a cracked chimney crown, two options exist. A stainless steel chimney cap can be mounted atop the crown, forming an “umbrella” above the chimney. Or, if the crown is too deteriorated, a new one is poured.

If a chimney is beyond recovery, a full or partial rebuild is in order. A masonry project takes three to five days; for appliance chimneys, usually one day. You and your Lake Church neighbors can expect scaffolding to be put up, or a temporary rooftop construction station built.

The chimney is rebuilt with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown employs a 2-inch overhang to keep water off the new chimney below. Your new chimney is as attractive as it is functional!

If you spot symptoms of a failing chimney, what’s the issue … and the fix? Only inspection by a qualified chimney company can find the answers. Time, though, is of the essence – contact Butler Chimneys before additional (or worse) symptoms appear!