fireplace inspection
Your Fireplace? Avert Problems With Routine Fireplace Inspections!
Many homeowners love their fireplaces … yet are oblivious of their hazards
if not properly maintained. More than 25,000 house fires in chimneys and fireplaces occur every year in the U.S.
Most of these fires are (caused by|linked to} creosote buildup (from burning wood) or flue blockages. Nearly all could be prevented by a fireplace inspection and cleaning – an investment whose payback can’t be measured in just dollars and cents.
A fireplace and chimney inspection typically lasts two hours, at most. It’s a thorough process of several steps. Hiring an experienced company such as Butler Chimneys, a knowledgeable fireplace and chimney cleaner in CITY, STATE, makes certain the job is done correctly.
The process begins with a visual examination of the fireplace, flue and chimney, to determine if cleaning is required. If so, a specialized cleaning method using flexible rods, a drill and whip head is used to aggressively remove creosote deposits from the surface of the flue system.
A video scan of the fireplace, and into the flue, can show structural cracks and gaps caused by a variety of factors – the worst being a hostile chimney fire. These voids, or patches of missing mortar, are places where smoke and hazardous creosote can escape the flue system – an unwanted situation in any home.
Are other appliances venting into the chimney? A chimney inspection identifies if they are and, if so, working correctly. In the attic, an inspector will look for structural voids that can allow deadly carbon monoxide into a home. They will also check for proper clearance from flammable materials such as wood joists or faced insulation.
A fireplace and chimney inspection finishes on the roof. Parts of the rooftop chimney structure – caps, rain guards, flashing, tiles or bricks – are checked for structural integrity, and potential for water penetration into a home.
All are barriers against the outdoor elements. Deficiencies such as a crack in the crown can allow water seepage. If interior-exterior joints aren’t sealed, water can gather and freeze, or soak into drywall. Ten years of hairline cracks can leak sufficient water to topple the top 15 layers of brick on a chimney.
Routine fireplace and chimney inspections are about more than averting fires. They also spot deterioration in the fireplace system and connecting structure. Early detection helps avoid costlier repairs later on.
Wisconsin’s climate doesn’t help. In winter, cold flue tiles are continually exposed to heat from fires, potentially causing) stress cracks. A fireplace inspection closely {examines the flue system to ensure tiles are properly aligned, with no voids or imperfections. Creosote often waits in the chamber beyond, making it critical that heat be channeled properly.
Likewise, the brick structure of the smoke chamber should have a refractory coating to keep smoke moving along and out. Masonry gaps here can allow smoke and embers to escape into places they’re not welcome, leading to a high risk of structure fires.
Annual fireplace inspection and cleaning is recommended by the National Fire Protection Association (NFPA), particularly for homes with wood-burning appliances. Late spring is ideal. If needed repairs are discovered, the weather is usually cooperative to get them done … and to beat the fall rush.
Be certain to have your fireplace and chimney inspected (and maintained) by a qualified fireplace cleaning and inspection company such as Butler Chimneys. All its staff are certified by the Chimney Safety Institute of America (CSIA). Consistent training prepares them for any challenge.
Ready to take a huge step for safety and fireplace performance? Contact Butler Chimneys to schedule a chimney and fireplace inspection and cleaning. A fireplace is easy to love – and even more so when one doesn’t have to be concerned about risks or dangers.