Allenton Chimney Repairs Needed? It’s Not Difficult to Find the Warnings

Evidence that a Allenton home’s chimney needs repairs isn’t difficult to find.

Bricks, or chips from bricks, on the ground next to the chimney. Staining of remaining bricks in the structure. Evident gaps between bricks. Efflorescence – a white, chalky powder – coating your Allenton chimney’s exterior.

Inside the home, discoloration or efflorescence inside the fireplace is a red flag, too.

Each symptom might have a different source. Hesitating to act isn’t wise, though. Complications can rapidly worsen. The initial step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Allenton.

The commonality in almost every chimney problem is water. Sometimes the cause is cracked or damaged flue tiles inside the chimney, which allow moisture to escape into the chimney cavity. If a water heater vents into the chimney, the situation can be far worse. Either way, problems ensue once moisture has direct contact with masonry.

Gaps in a chimney – from absent bricks, or compromised mortar joints – are serious red flags. Allenton rains can directly get inside the chimney cavity, making a bad scenario far worse.

The first step is to confront root causes. If flue tiles have lost their structural integrity, putting in a stainless steel chimney liner usually stops internal moisture issues. The damage to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is sometimes all that’s required. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ standard five-year warranty, guaranteeing a decade of protection from the elements.

If the source of water leakage is a cracked chimney crown, two options exist. A stainless steel chimney cap can be mounted atop the crown, creating an “umbrella” above the chimney. Or, if the crown is too damaged, a new one is poured.

If a chimney is beyond saving, a full or partial rebuild is in line. A masonry project runs three to five days; for appliance chimneys, usually one day. You and your Allenton neighbors can expect scaffolding to be erected, or a temporary rooftop construction station built.

The chimney is reconstructed with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown employs a 2-inch overhang to keep water off the new chimney below. Your new chimney is as attractive as it is functional!

If you spot symptoms of a deteriorating chimney, what’s the problem … and the fix? Only inspection by a qualified chimney company can find the answers. Time, though, is of the essence – contact Butler Chimneys before additional (or worse) symptoms show up!