Saint Michaels Chimney Repairs Required? It’s Not Hard to Spot the Warnings

Evidence that a Saint Michaels home’s chimney needs repairs isn’t hard to identify.

Bricks, or chips from bricks, on the ground next to the chimney. Discoloration of remaining bricks in the structure. Obvious gaps between bricks. Efflorescence – a white, chalky powder – lining your Saint Michaels chimney’s exterior.

Inside the home, discoloration or efflorescence inside the fireplace is a red flag, too.

Each sign might have a different source. Waiting to act isn’t recommended, though. Complications can rapidly worsen. The initial step is a chimney and fireplace inspection by Butler Chimneys, the top chimney sweep company in Saint Michaels.

The common factor in nearly every chimney problem is water. Often the cause is cracked or damaged flue tiles inside the chimney, which permit moisture to seep into the chimney cavity. If a water heater vents into the chimney, the problem can be far worse. Either way, problems ensue when moisture has direct contact with masonry.

Gaps in a chimney – from absent bricks, or compromised mortar joints – are serious warnings. Saint Michaels rains can directly get inside the chimney cavity, making a bad situation far worse.

The initial step is to address root causes. If flue tiles have lost their structural integrity, installing a stainless steel chimney liner usually stops internal moisture issues. The harm to the chimney remains, though.

Tuckpointing - grinding out and replacing deteriorated mortar – is occasionally all that’s required. Adding optional ChimneySaver water repellent tacks five years onto Butler Chimneys’ regular five-year warranty, promising a decade of protection from the elements.

If the source of water leakage is a damaged chimney crown, two options are available. A stainless steel chimney cap can be mounted atop the crown, forming an “umbrella” above the chimney. Or, if the crown is too deteriorated, a new one is poured.

If a chimney is beyond saving, a full or partial rebuild is in line. A masonry project takes three to five days; for appliance chimneys, usually one day. You and your Saint Michaels neighbors can expect scaffolding to be put up, or a temporary rooftop construction station built.

The chimney is reconstructed with fresh bricks and new mortar to building code height. Butler Chimneys works to match colors of new bricks to originals; bricks can be stained, if needed.

A new 5-inch-thick concrete crown is poured on top. The crown uses a 2-inch overhang to keep water off the new chimney below. Your new chimney is as attractive as it is functional!

If you notice indicators of a failing chimney, what’s the problem … and the remedy? Only inspection by a qualified chimney company can tell. Time, though, is of the essence – contact Butler Chimneys before additional (or worse) symptoms show up!