fireplace inspection
Your Fireplace? Prevent Problems With Routine Fireplace Inspections!
Many homeowners value their fireplaces … yet are oblivious of their dangers if not properly maintained. More than 25,000 house fires in chimneys and fireplaces happen annually in the U.S.
Most of these fires are (caused by|linked to} creosote accumulation (from burning wood) or flue blockages. Nearly all could be prevented by a fireplace inspection and cleaning – an investment whose ROI can’t be figured in just dollars and cents.
A fireplace and chimney inspection typically uses two hours, at most. It’s a detailed process of several steps. Hiring an experienced company such as Butler Chimneys, a longtime fireplace and chimney cleaner in CITY, STATE, makes certain the job is done correctly.
The process starts with a visual analysis of the fireplace, flue and chimney, to decide if cleaning is necessary. If so, a specialized cleaning method employing flexible rods, a drill and whip head is used to aggressively remove creosote deposits from the surface of the flue system.
A video scan of the fireplace, and into the flue, can show structural cracks and gaps connected with a range of factors – the worst being a hostile chimney fire. These voids, or patches of missing mortar, are places where smoke and hazardous creosote can leak from the flue system – an unwelcome situation in any home.
Are other appliances venting into the chimney? A chimney inspection confirms if they are and, if so, operating correctly. In the attic, an inspector will seek out structural voids that can allow deadly carbon monoxide into a home. They will also check for proper clearance from flammable materials such as wood joists or faced insulation.
A fireplace and chimney inspection winds up on the roof. Elements of the rooftop chimney structure – caps, rain guards, flashing, tiles or bricks – are checked for structural integrity, and potential for water penetration into a home.
All are barriers against the outdoor elements. Flaws such as a crack in the crown can permit water seepage. If interior-exterior joints aren’t sealed, water can gather and freeze, or soak into drywall. Ten years of hairline cracks can leak enough water to topple the top 15 courses of brick on a chimney.
Planned fireplace and chimney inspections are about more than averting fires. They also catch deterioration in the fireplace system and connecting structure. Early detection helps avoid costlier repairs in the future.
Wisconsin’s weather doesn’t help. In winter, cold flue tiles are continually exposed to heat from fires, leading to the flue system to ensure tiles are correctly aligned, with no voids or imperfections. Creosote often lurks in the chamber beyond, making it vital that heat be channeled properly.
Similarly, the brick structure of the smoke chamber should have a refractory covering to keep smoke moving along and out. Masonry voids here can permit smoke and embers to leak into places they’re not welcome, leading to a high risk of structure fires.
Annual fireplace inspection and cleaning is advised by the National Fire Protection Association (NFPA), especially for homes with wood-burning appliances. Late spring is ideal. If necessary repairs are identified, the weather is usually cooperative to get them done … and to beat the fall rush.
Be sure to have your fireplace and chimney inspected (and maintained) by a qualified fireplace cleaning and inspection company such as Butler Chimneys. All its staff are certified by the Chimney Safety Institute of America (CSIA). Consistent training prepares them for any challenge.
Ready to take a huge step for safety and fireplace performance? Contact Butler Chimneys to schedule a chimney and fireplace inspection and cleaning. A fireplace is easy to love – and even more so when one doesn’t have to fear risks or dangers.