Maintain Your Fireplace Ambiance, and Increase the Warmth, With a Fireplace Insert!

On a frosty Eagle day, nothing “warms” up a space (metaphorically speaking) like a blazing fireplace. The light, sound and movement all combine for a romantic, relaxing environment.

Unfortunate fact is, an open-hearth woodburning fireplace barely warms a space. Up to 90 percent of the fire’s heat is lost through the chimney. An open fire actually draws more heat out of a space than it could possibly return. Homeowners run a fire risk from airborne sparks landing on flammable surfaces, as well.

Like to make your fireplace experience safer, far warmer and more comfortable with a sleek, highly-efficient fireplace insert in Eagle!

Inserted right into the fireplace opening, a fireplace insert for a woodburning fireplace is a self-contained appliance that transfers heat directly into a room, rather than sending most up a chimney. The fire can be seen via a glass panel. The ambiance stays – along with far more warmth!

Homeowners can select between gas fireplace inserts and wood fireplace inserts. Both are offered by Butler Chimneys, your fireplace and chimney inspection company in Eagle. 

Which fireplace insert is for you?

 

A gas insert is custom-made for those who want immediate, low-maintenance fire. The fire literally ignites at the flip of a switch. Available in a broad range of designs, gas fireplace inserts are fast, clean, and minimal work to operate and maintain.

A woodburning fireplace insert emits significantly more heat than gas. The work required is much greater, though. A fire has to be physically ignited, wood added, and air controls adjusted to moderate the blaze. Because it burns so completely, a wood fireplace insert consumes much less timber than an open-hearth setup. For those with unlimited or cheap sources of firewood in Eagle, a wood burning insert can be noticeably) more cost-effective, and a nice {supplemental heating source for a home.

The choice between gas or woodburning is completely user preference. Many Eagle homeowners proactively install insert-style fireplaces for enhanced heat and cleanliness, often when building homes.

The alternative scenario for adding an insert is when a fireplace inspection discovers cracked or missing flue tiles. Installing a brand-new insert will get around many issues, and is often less expensive than making repairs. The decision might not be too hard.

Fireplace inserts are made of heavy-gauge sheet steel. The doors are cast iron, which allows fantastic heat conduction. Fire is completely enclosed within, seen through ceramic glass, and can be left unattended.

Smoke is expelled via a new stainless steel liner installed inside the chimney. Wood fireplace inserts use a single 6-inch liner; gas, two 3-inch liners, one for delivering air to the firebox, and another for expelling gases.

Butler Chimneys regularly installs fireplace inserts – gas or wood – in homes in Eagle in one day. If the former is added, a new fuel line is run from a gas source elsewhere in the house.

New stainless steel chimney liners have lifetime warranties. Their installation can sometimes allow homeowners to skip expensive chimney repairs that would otherwise be needed to ensure safe venting of fireplace gases.

Another advantage of fireplace inserts? If power goes out, they remain a steady, reliable heat source. In severe weather, they can literally be a lifesaver.

Ready to ponder a fireplace insert? Contact Butler Chimneys. You’ll appreciate the ambiance of a fireplace … and a far warmer, more comfortable space around you!