fireplace inspection
Your Fireplace? Prevent Problems With Routine Fireplace Inspections!
Many homeowners relish their fireplaces … yet are unaware of their risks if not properly maintained. More than 25,000 house fires in chimneys and fireplaces happen annually in the U.S.
Most of these fires are (caused by|linked to} creosote accrual (from burning wood) or flue obstructions. Nearly all could be avoided by a fireplace inspection and cleaning – an investment whose ROI can’t be measured in just dollars and cents.
A fireplace and chimney inspection generally lasts two hours, at most. It’s a thorough process of several steps. Hiring an experienced company such as Butler Chimneys, a longtime fireplace and chimney cleaner in CITY, STATE, makes certain the job is done correctly.
The process opens with a visual inspection of the fireplace, flue and chimney, to decide if cleaning is advisable. If so, a specialized cleaning procedure using flexible rods, a drill and whip head is used to aggressively remove creosote deposits from the surface of the flue system.
A video scan of the fireplace, and into the flue, can expose structural cracks and gaps connected with a variety of factors – the worst being a hostile chimney fire. These voids, or sections of missing mortar, are places where smoke and hazardous creosote can leak from the flue system – an uninvited situation in any home.
Are other appliances venting into the chimney? A chimney inspection determines if they are and, if so, functioning correctly. In the attic, an inspector will look for structural gaps that can allow deadly carbon monoxide into a home. They will also check for proper clearance from combustible materials such as wood joists or faced insulation.
A fireplace and chimney inspection finishes on the roof. Parts of the rooftop chimney structure – caps, rain guards, flashing, tiles or bricks – are analyzed for structural integrity, and potential for water penetration into a home.
All are barriers against the outdoor elements. Shortcomings such as a crack in the crown can permit water seepage. If interior-exterior joints aren’t sealed, water can pool and freeze, or soak into drywall. Ten years of hairline cracks can leak enough water to topple the top 15 courses of brick on a chimney.
Planned fireplace and chimney inspections are about more than preventing fires. They also spot deterioration in the fireplace system and connecting structure. Early diagnosis helps prevent costlier repairs in the future.
Wisconsin’s climate doesn’t help. In winter, cold flue tiles are continually assaulted by heat from fires, leading to the flue system to ensure tiles are properly aligned, with no voids or imperfections. Creosote often waits in the chamber beyond, making it vital that heat be channeled properly.
Similarly, the brick structure of the smoke chamber should have a refractory covering to keep smoke moving along and out. Masonry gaps here can permit smoke and embers to escape into places they’re not welcome, leading to a high risk of structure fires.
Annual fireplace inspection and cleaning is recommended by the National Fire Protection Association (NFPA), particularly for homes with wood-burning appliances. Late spring is ideal. If necessary repairs are found, the weather is usually cooperative to get them done … and to beat the fall rush.
Be certain to have your fireplace and chimney inspected (and maintained) by a qualified fireplace cleaning and inspection company such as Butler Chimneys. All its staff are certified by the Chimney Safety Institute of America (CSIA). Consistent training prepares them for any challenge.
Ready to take a major step for safety and fireplace performance? Contact Butler Chimneys to schedule a chimney and fireplace inspection and cleaning. A fireplace is easy to love – and even more so when one doesn’t have to worry about risks or dangers.