fireplace inspection
Your Fireplace? Prevent Problems With Routine Fireplace Inspections!
Many homeowners value their fireplaces … yet are oblivious of their hazards
if not properly maintained. More than 25,000 house fires in chimneys and fireplaces occur annually in the U.S.
Most of these fires are (caused by|linked to} creosote buildup (from burning wood) or flue blockages. Nearly all could be avoided by a fireplace inspection and cleaning – an investment whose payback can’t be measured in just dollars and cents.
A fireplace and chimney inspection generally takes two hours, at most. It’s a thorough process of several steps. Hiring an experienced company such as Butler Chimneys, a veteran fireplace and chimney cleaner in CITY, STATE, makes certain the job is done correctly.
The process begins with a visual examination of the fireplace, flue and chimney, to decide if cleaning is required. If so, a specialized cleaning procedure using flexible rods, a drill and whip head is used to aggressively remove creosote deposits from the surface of the flue system.
A video scan of the fireplace, and into the flue, can show structural cracks and gaps caused by a range of factors – the worst being a hostile chimney fire. These voids, or patches of missing mortar, are places where smoke and dangerous creosote can escape the flue system – an unwelcome situation in any home.
Are other appliances venting into the chimney? A chimney inspection confirms if they are and, if so, functioning properly. In the attic, an inspector will seek out structural voids that can permit deadly carbon monoxide into a home. They will also check for proper clearance from flammable materials such as wood joists or faced insulation.
A fireplace and chimney inspection winds up on the roof. Parts of the rooftop chimney structure – caps, rain guards, flashing, tiles or bricks – are analyzed for structural integrity, and potential for water penetration into a home.
All are barriers against the outdoor elements. Shortcomings such as a crack in the crown can permit water seepage. If interior-exterior joints aren’t sealed, water can pool and freeze, or soak into drywall. Ten years of hairline cracks can allow in sufficient water to topple the top 15 layers of brick on a chimney.
Regular fireplace and chimney inspections are about more than avoiding fires. They also detect deterioration in the fireplace system and connecting structure. Early diagnosis helps avert costlier repairs later on.
Wisconsin’s weather doesn’t help. In winter, cold flue tiles are continually assaulted by heat from fires, potentially causing) stress cracks. A fireplace inspection closely {examines the flue system to ensure tiles are correctly aligned, with no voids or imperfections. Creosote often lurks in the chamber beyond, making it vital that heat be channeled properly.
Similarly, the brick structure of the smoke chamber should have a refractory covering to keep smoke moving along and out. Masonry voids here can allow smoke and embers to leak into places they’re not welcome, leading to a high risk of structure fires.
Annual fireplace inspection and cleaning is endorsed by the National Fire Protection Association (NFPA), particularly for homes with wood-burning appliances. Late spring is ideal. If needed repairs are spotted, the weather is usually cooperative to get them done … and to beat the fall rush.
Be certain to have your fireplace and chimney inspected (and maintained) by a qualified fireplace cleaning and inspection company such as Butler Chimneys. All its personnel are certified by the Chimney Safety Institute of America (CSIA). Consistent training prepares them for any challenge.
Ready to take a major step for safety and fireplace performance? Contact Butler Chimneys to schedule a chimney and fireplace inspection and cleaning. A fireplace is easy to love – and even more so when one doesn’t have to fear risks or dangers.