fireplace inspection
Your Fireplace? Avoid Problems With Routine Fireplace Inspections!
Many homeowners adore their fireplaces … yet are unaware of their risks if not properly kept up. More than 25,000 house fires in chimneys and fireplaces happen annually in the U.S.
Most of these fires are (caused by|linked to} creosote accumulation (from burning wood) or flue obstructions. Nearly all could be prevented by a fireplace inspection and cleaning – an investment whose return can’t be figured in just dollars and cents.
A fireplace and chimney inspection generally takes two hours, at most. It’s a detailed process of several steps. Hiring an experienced company such as Butler Chimneys, a knowledgeable fireplace and chimney cleaner in CITY, STATE, ensures the job is done right.
The process begins with a visual analysis of the fireplace, flue and chimney, to determine if cleaning is required. If so, a specialized cleaning procedure using flexible rods, a drill and whip head is used to aggressively remove creosote deposits from the surface of the flue system.
A video scan of the fireplace, and into the flue, can discover structural cracks and gaps connected with a range of factors – the worst being a hostile chimney fire. These voids, or patches of missing mortar, are spots where smoke and hazardous creosote can escape the flue system – an unwelcome situation in any home.
Are other appliances venting into the chimney? A chimney inspection confirms if they are and, if so, operating properly. In the attic, an inspector will look for structural voids that can permit deadly carbon monoxide into a home. They will also check for proper clearance from combustible materials such as wood joists or faced insulation.
A fireplace and chimney inspection ends on the roof. Parts of the rooftop chimney structure – caps, rain guards, flashing, tiles or bricks – are analyzed for structural integrity, and potential for water penetration into a home.
All are barriers against the outdoor elements. Flaws such as a crack in the crown can permit water seepage. If interior-exterior joints aren’t sealed, water can collect and freeze, or soak into drywall. Ten years of hairline cracks can allow in enough water to topple the top 15 courses of brick on a chimney.
Regular fireplace and chimney inspections are about more than preventing fires. They also detect deterioration in the fireplace system and connecting structure. Early detection helps avert costlier repairs later on.
Wisconsin’s weather doesn’t help. In winter, cold flue tiles are continually assaulted by heat from fires, leading to the flue system to ensure tiles are correctly aligned, with no voids or imperfections. Creosote often lurks in the chamber beyond, making it vital that heat be channeled properly.
Likewise, the brick structure of the smoke chamber should have a refractory coating to keep smoke moving along and out. Masonry gaps here can permit smoke and embers to escape into places they’re not welcome, leading to a high risk of structure fires.
Annual fireplace inspection and cleaning is endorsed by the National Fire Protection Association (NFPA), particularly for homes with wood-burning appliances. Late spring is ideal. If needed repairs are found, the weather is usually manageable to get them done … and to beat the fall rush.
Be sure to have your fireplace and chimney inspected (and maintained) by a qualified fireplace cleaning and inspection company such as Butler Chimneys. All its staff are certified by the Chimney Safety Institute of America (CSIA). Consistent training prepares them for any challenge.
Ready to take a major step for safety and fireplace performance? Contact Butler Chimneys to book a chimney and fireplace inspection and cleaning. A fireplace is easy to love – and even more so when one doesn’t have to fear risks or dangers.