fireplace inspection
Your Fireplace? Avoid Problems With Regular Fireplace Inspections!
Many homeowners adore their fireplaces … yet are unaware of their hazards
if not properly kept up. More than 25,000 house fires in chimneys and fireplaces occur annually in the U.S.
Most of these blazes are (caused by|linked to} creosote accumulation (from burning wood) or flue blockages. Nearly all could be avoided by a fireplace inspection and cleaning – an investment whose ROI can’t be determined in just dollars and cents.
A fireplace and chimney inspection generally lasts two hours, at most. It’s a thorough process of several steps. Hiring an experienced company such as Butler Chimneys, a knowledgeable fireplace and chimney cleaner in CITY, STATE, makes certain the job is done right.
The process opens with a visual examination of the fireplace, flue and chimney, to decide if cleaning is advisable. If so, a specialized cleaning procedure employing flexible rods, a drill and whip head is used to aggressively remove creosote deposits from the surface of the flue system.
A video scan of the fireplace, and into the flue, can discover structural cracks and gaps connected with a range of factors – the worst being a hostile chimney fire. These voids, or sections of missing mortar, are spots where smoke and hazardous creosote can leak from the flue system – an uninvited situation in any home.
Are other appliances venting into the chimney? A chimney inspection identifies if they are and, if so, working correctly. In the attic, an inspector will look for structural gaps that can permit deadly carbon monoxide into a home. They will also check for proper clearance from combustible materials such as wood joists or faced insulation.
A fireplace and chimney inspection winds up on the roof. Parts of the rooftop chimney structure – caps, rain guards, flashing, tiles or bricks – are checked for structural integrity, and potential for water penetration into a home.
All are barriers against the outdoor elements. Shortcomings such as a crack in the crown can permit water seepage. If interior-exterior joints aren’t sealed, water can collect and freeze, or soak into drywall. Ten years of hairline cracks can allow in sufficient water to topple the top 15 layers of brick on a chimney.
Planned fireplace and chimney inspections are about more than avoiding fires. They also catch deterioration in the fireplace system and connecting structure. Early detection helps avoid costlier repairs down the road.
Wisconsin’s climate doesn’t help. In winter, cold flue tiles are continually exposed to heat from fires, looks at the flue system to ensure tiles are correctly aligned, with no voids or imperfections. Creosote often lurks in the chamber beyond, making it critical that heat be channeled properly.
Similarly, the brick structure of the smoke chamber should have a refractory layer to keep smoke moving along and out. Masonry voids here can allow smoke and embers to escape into places they’re not welcome, leading to a high risk of structure fires.
Annual fireplace inspection and cleaning is advised by the National Fire Protection Association (NFPA), particularly for homes with wood-burning appliances. Late spring is ideal. If needed repairs are spotted, the weather is usually manageable to get them done … and to beat the fall rush.
Be certain to have your fireplace and chimney inspected (and maintained) by a qualified fireplace cleaning and inspection company such as Butler Chimneys. All its personnel are certified by the Chimney Safety Institute of America (CSIA). Consistent training prepares them for any challenge.
Ready to take a big step for safety and fireplace performance? Contact Butler Chimneys to plan a chimney and fireplace inspection and cleaning. A fireplace is easy to love – and even more so when one doesn’t have to worry about risks or dangers.